SVR-PRO 100 SRI SATA III 6Gbps 2.5" SSD

The SVR-PRO 100 SRI SSD range is designed for Read intensive applications, offers up to a massive 8TB of data storage and features consistently low latency with a superior level of read and write IOPS.

Delivers solid I/O cost-to-performance benefits for applications that demand low latency read speeds and greater bandwidth for server and storage environments for Serial Advanced Technology Attachment (SATA)-based systems in capacities of 480GB, 960GB, 4TB and 8TB.

Uses a single-chip controller with a SATA interface on the system side and 8-channels of Flash internally. The industry-standard 2.5-inch form factor enables interchangeability with existing hard disk drives (HDDs) and native SATA HDD drop-in replacement with the enhanced performance, reliability, ruggedness, and power savings offered by an SSD.

SVR-PRO 100 has the capacity you require for storage-hungry SATA based systems.

Benefits

• High capacity SSDs for big data storage (4TB and 8TB)
• Designed for read intensive applications
• Reduced latencies
• Lower Power Consumption
• Non-volatile Flash Memory for outstanding data retention - Less likely to fail than HDD
• Shock resistance - No moving parts enable the product to be used in tougher conditions
• Silent operation - Noiseless and low heat dissipation
• Much less heat generated than conventional HDD

Features

• 2.5" form factor with SATA III 6Gbps interface (backwards compatible with SATA 3Gbps and SATA 1.5Gbps)
• Sequential Read up to 554MB/s and Write up 517MB/s
• Random Read IOPS up to 80K, Random Write up to 70K
• Supports S.M.A.R.T. - Self-Monitoring, Analysis and Reporting Technology
  
  • Features an internal temperature sensor with an accuracy of +/-2°C over a range of -40°C to +125°C which can be monitored using a SMART attribute BEh
  • The SSD hardware is built with a number of capacitors that ensure that the data in the write cache of the SSD is protected against corruption if a power loss was to occur, enabling the SSD to complete the last write command to the NAND flash
• CE and FCC compliant
• 5 Year Warranty or maximum endurance use.